Tech Articles

Exporting the Deformed Mesh (Post Mesh) as STL file


Tech Articles ID    KB8022565
Status:    Published
Published date:    04/12/2016
Updated:    04/15/2016
Reported In:   Marc & Mentat
 

Abstract (Question)

How to export the deformed mesh (post mesh) as an STL file?

Description (Answer)

In order to export the deformed  mesh (post mesh) as an STL file you should follow these steps: 
1. Rezone Mesh:

After the Job is run, in the results file (.t16 file), go to the desired increment, Select tool and then click "Rezone Mesh" .

The rezone mesh command adds the current displacements of each node to its coordinates. As a result, the Original configuration will become the same as the Deformed configuration. This is what happening when you do "Rezone Mesh" in any increment. If you execute "Rezone Mesh" again, this process happens again. So you should execute it just once. 


 

2. Save the File:

Select File > save As and save a new mud file

Note the STL format does not support 3D elements.


 

3.  Open the saved Mud file in the previous step 


4. Export the STL file

Select File > Export > STL...  In order to export the deformed  mesh (post mesh) as an STL file 


 

5. Import the STL file

In order to open a STL file, select File > Import > STL... 


Rate this Page
Rate the quality of this article from 5 (high) to 1 (low):
1
2
3
4
5
 
How can we improve this?

 

Discuss this Tech Articles

 

Please Sign In

Sign In Password Help | Start here

Get what you want from MSC more efficiently and effectively, either reactively through browsing and searching, or proactively through content subscriptions that you manage.

Click here for a tour of SimCompanion

Click image above for a tour of SimCompanion.

Communities